Stan's NoTubes NEO Hubs

The Center of our Attention

Developed with feedback from racers and riders around the world, our entirely new Neo and Neo Ultimate hubs offer maximum durability, quicker engagement, and options to fit every axle standard.

Neo service manual



Neo Ultimate

  • Stronger, lighter 100% precision CNC machined hub shell
  • 6-Pawl, 72-Point (5°) system for ultimate engagement
  • Oversize bearings for maximum durability
  • Swaged axle and wide bearing stance is 3x stronger than conventional designs
  • High durometer main seal integrated into hub shell
  • Laser-etched SealLock end caps lock into place and roll smoother
  • Additional CNC machining for an even lighter hub shell
  • Angled flanges for improved spoke alignment and more consistent tension

Detailed Spec

  • 72 Points of contact, 5° of engagement
  • 100% Precision CNC Hub Shell
  • 6 Pawl Asynchronous Engagement
  • Oversized Stainless bearings (6802 to 6902 = +4mm OD and +2mm Wide)
  • Wide Stance Bearing in Freehub support/stabilize the system
  • Integrated High Durometer Seal
  • Seven Step Swaged and Centerless Ground Axle for strength and precision
  • Forged Steel 36t Ratchet Ring for stronger grain structure
  • Slip-Fit axle ends for easy conversions
  • Front Axle Options: Front: 9x100mm QR, 9x100mm TA, 12x100mm TA, 15x100mm TA, 15x110mm TA, and 20x110mm TA
  • Rear Axle Options: Rear: 10x130mm QR, 10x135mm QR, 10x135mm TA, 12x135mm TA, 12x142mm TA, 12x148mm TA, 12x150mm TA, and 12x157mm TA
  • Cassette Options: Cassette Options: Shimano/SRAM, SRAM XD, or Campagnolo
  • Brake Options: 6 bolt IS, Centerlock®





Neo

  • Stronger, lighter 100% precision CNC machined hub shell
  • 4PAWL, 36-Point (10°) system for quicker engagement
  • Oversize bearings for maximum durability
  • Swaged axle and wide bearing stance is 3x stronger than conventional designs
  • High durometer main seal integrated into hub shell
  • Laser-etched SealLock end caps lock into place and roll smoother

Detailed Spec

  • 36 Points of contact, 10° of engagement
  • 100% Precision CNC Hub Shell
  • 4 Pawl, Simultaneous engagement
  • Oversized Chrome bearings (6802 to 6902 = +4mm OD and +2mm Wide)
  • Wide Stance Bearing in Freehub support/stabalize the system
  • Integrated High Durometer Seal
  • Seven Step Swaged and Centerless Ground Axle for strength and precision
  • Forged Steel 36t Ratchet Ring for stronger grain structure
  • Slip-Fit axle ends for easy conversions
  • Front Axle Options: Front: 9x100mm QR, 9x100mm TA, 12x100mm TA, 15x100mm TA, 15x110mm TA, and 20x110mm TA
  • Rear Axle Options: Rear: 10x130mm QR, 10x135mm QR, 10x135mm TA, 12x135mm TA, 12x142mm TA, 12x148mm TA, 12x150mm TA, and 12x157mm TA
  • Cassette Options: Cassette Options: Shimano/SRAM, SRAM XD, or Campagnolo
  • Brake Options: 6 bolt IS, Centerlock®