Please select the correct XD Freehub for your hub.
What type of hub do I have?
Stan’s original lightweight 3.30 & 3.30Ti hubs' end caps are all aluminum and threaded on both sides as shown in photo A. Many of Stan’s new 3.30 hubs come with a Type II axle and press-on non-drive side end cap as shown in photo B. The Type II hubs in 5mm/QR or 10mm/thru end caps have steel inserts on the end of each cap and the left end cap is not threaded.
Table A Table B
Each kit in Table A comes with an XD Driver, axle, drive side AND non-drive side end caps.
For Type II hubs with a press-on non-drive side end cap choose the correct XD driver kit for your desired configuration from Table B. For hubs currently configured as 12x135 or 12x142 also select your kit from Table B. Each kit in Table B comes with XD Driver and drive side end cap.
TABLE A - XD Driver AND Axle kit
Each kit includes XD Driver, axle, drive side AND non-drive side end caps
TABLE B - XD Driver kit
Each kit includes XD Driver and drive side end cap
Instructions Video Instructions